메인 콘텐츠로 스킵하기
도움말
7단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Before removing the board, be very careful because the board is glued to the rear chassis. Use a spluger at the points indicated by the arrow to loosen the adhesive connecting the board to the chassis.

Once the board is free of the chassis, then carefully remove the tape as pointed to by the arrow. There will be a connector to be removed from the board with a spluger.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.