주요 콘텐츠로 건너뛰기
도움말
2단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Remove the T8 Torx screw securing the Bluetooth board to the case.

Do not attempt to completely remove the board yet, as it is still attached by a cable.

Remove the tape wrapped around the Bluetooth board, being careful not to put to much tension on the still connected cable.

Use the flat end of a spudger to pull the Bluetooth data cable out of its connector and remove the Bluetooth board.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.