주요 콘텐츠로 건너뛰기
도움말
6단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Locate the AirPort card at the top center of the logic board and just below the hard drive.

Use the flat end of a spudger to gently pry each of the antenna cables off their sockets.

Do not disconnect the antennas by pulling on the cables as this may damage the cables, connectors, or sockets.

The antennas have markings to help you identify their order. The antenna with no marks goes to "CH0", the antenna with one mark goes to "CH1", and the antenna with two marks goes to "CH2".

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.