주요 콘텐츠로 건너뛰기
도움말
5단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

The battery is secured with three pieces of adhesive, a removable pull-tab in the center, and on the SIM tray side. A third piece of adhesive on the button side has no pull-tab.

Pull the adhesive tabs in a slow constant movement to free the battery.

Should those adhesive tabs snap, you might want to use an iOpener to heat and soften them a little bit so you can pry out the battery with a spudger.

There are two cables running directly underneath the battery. Take care not to damage them when prying with a spudger! You can see their position in the last picture.

Slowly lift the battery toward the button side and free it from the remaining hidden piece of adhesive.

When reassembling your phone replace old adhesive with double-sided tape or pre-cut adhesive strips.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.