메인 콘텐츠로 스킵하기
도움말
6단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Motherboard removal is next. We start with the wireless card—pretty straightforward.

After removing the five screws and three remaining cables connected to the motherboard, we discover there are two cables connected to the back of the board. This is inconvenient and means we need to remove the selfie camera with the main board.

Flipping the motherboard over reveals a pair of screws securing the lower assembly flex cable to the main board.

With those taken care of, we flip the ZIF connector for the selfie camera, slip it out of the socket, and the motherboard removal is complete.

Board shot for reference.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.