1
2
3
Use a spudger to pry the fan connector straight up off the logic board.
Be sure to only pry up on the connector itself not on the socket or you may damage the machine.
It is useful to twist the spudger axially from beneath the fan cable wires to release the connector.
« 소개
다음 »
귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.
다음 줄
이전 줄
아래에 새로운 줄 삽입
위에 새로운 줄 삽입
현재 줄 들여쓰기
현재 줄 내어쓰기
현재 줄 삭제
다음 단계로 이동.
이전 단계로 이동.
도움말 열기