주요 콘텐츠로 건너뛰기
도움말
5단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Unsolder all the capacitors and remove them. In this repair a 30watt soldering iron and solder sucker was used. The solder sucker can be substituted with soldering wick.

Solder all the capacitors in their respective places. On the logic board, where the capacitors are located, is an outline of a circle with one part of the circle being heavier. It corresponds with the negative lead of the condenser.

Once all the capacitors are replaced, double check the board to make sure everything is properly mounted.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.