Skip to main content
도움말
1단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 16 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Three Pentalobe screws secure the battery to the upper case. They can be removed with this special driver.

If you don't have a Pentalobe driver, a 1.5 mm flathead screwdriver can be used in a pinch. Be sure the head of your flathead screwdriver fits snugly across two of the five "points" of the screw head before trying to break the screw free, as a loose fit will easily strip the screw head.

If the head of your screwdriver fits too loosely, find a bigger bit and file it down until it fits snugly before proceeding.

You do not necessarily have to follow steps 3-7 to remove the battery in order to replace the hard drive. However, it is recommended to remove all power sources from electronics before working on them.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.