주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

도움말
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Lay the bottom part of the device upside down on a table.

Locate the four PH1 screw heads on the underside.

We used the driver and 150mm driver extension with a PH1 screwdriver bit (from 64 Bit Driver Kit) to elongate the driver. (See note below and second image)

NOTE: The PH1 screw heads are located 5cm into the device. Make sure to use a PH1 Driver that is at most 1cm in diameter and at least 5cm in depth.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.