주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

도움말
7단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

To remove the blue LED, carefully pull the LED through the holes on the connector.

To add the new LED, make sure to connect the longer metal side (positive end) to the red side on the connector (positive end). The shorter end (negative side) should be connected to the black wire (negative side).

Once the LED is in and to make sure the LED stays connected, bend the metal ends at least 90 degrees to prevent it from sliding out of the connector.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.