주요 콘텐츠로 건너뛰기
도움말
9단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 8 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Using tweezers, gently pull the five marked ribbons out of the ZIF connectors along the sides of the motherboard.

Note that these ZIF connectors are held in place by friction and do not have locks -- lifting the flaps on these connectors will break them!

Three of the ribbon connectors have plastic clamping flaps that cover the ribbon to prevent slippage. Use the tweezers to flip them up before ribbon removal.

When reassembling the device, be sure to flip the ZIF clamps back down.

While the SD card reader is shown as removed in this photo, it is optional for the removal of the motherboard.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.