주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

도움말
2단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

With tweezers, lift the locking flaps and detach the connected ribbon cables for both the LCD and digitizer (blue bordered areas in previous step photo)

Using a spudger lift the gold- colored base up away from the adhesive.

This particularly ribbon connection will likely be difficult to detach from the casing. Proceed with patience and caution during removal process.

Check your replacement LCD to see if it includes a new ribbon cable (black one in second photo). If not, you'll need to peel up the tape securing it, and disconnect it at the LCD end instead of the motherboard end.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.