주요 콘텐츠로 건너뛰기
도움말
10단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

To test the lens calibration reassemble the console up to the ground springs near the memory card slots.

The memory card ground springs MUST be put back on prior to restarting your console.

If any further adjustments are necessary just turn the potensiometer no more than 1 or 2 degrees more per readjustment. Eventually you'll start to see less DRE messages.

Once there no more DRE messages, turn the potensiometer a further 1 degrees to "future-proof" your lens from DRE messages in the future.

As stated in the title of this guide. This procedure may not fix your DRE problems if the faut lies elsewhere in the system. But this will cover about 98% of DRE messages.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.