주요 콘텐츠로 건너뛰기
도움말
7단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

The haptic feedback vibrator is soldered to a speaker that is held in place by adhesive.

There are four speakers that are all mounted to the midframe with adhesive. Prying with a spudger can free them.

The cameras are connected to the motherboard with press connectors, and are secured by friction.

The headphone jack is modular and held in place by the screws that secured the midframe. This is a good design feature as headphone jacks undergo wear and are more likely to need replacement.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.