Skip to main content
도움말
13단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Disconnect the camera from the motherboard. There are 1.5mm gaps on either side of the connector between the connector and its port. Put the pointed end of the spudger in one gap at a time and "walk" the connector out by wedging out the connector on each side.

If it is difficult to pry out the connector completely with the spudger, you may remove it by hand.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.