Skip to main content
Help
8단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

If you successfully removed both adhesive strips, move on to the next step. Otherwise, you will need to pry the battery from the rear case.

Prepare an iOpener and apply it to the back of the rear case, directly over the battery. Alternatively, you can apply heat using a heat gun or hair dryer.

After about a minute, remove the iOpener, flip the phone over and use a plastic card to break up any remaining adhesive behind the battery.

Avoid bending the battery. Damage to the battery may release dangerous chemicals, and could start a fire.

Do not pry under the top third of the battery, you may damage the volume button ribbon cable.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.