메인 콘텐츠로 스킵하기
도움말
1단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Flip the logic board over to expose the antenna on the back side.

Disconnect the four coaxial connectors from the logic board and remove the antenna cable from the logic board.

Be careful not to touch any metal to metal contact points with your bare fingers—use tweezers or gloves. Finger oils may disrupt conductivity. If you do touch any of these components, clean them with a degreaser like windex or isopropyl alcohol before reassembly.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.