주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

도움말
2단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Using a soldering iron set at 400 degrees Celsius (752 degrees Fahrenheit), heat the solder joints lateral to the USB port. Use a pair of tweezers to lift the port from the board.

Extreme caution should be taken when working with high-temperature equipment to reduce the chance of burns.

Care should be taken while desoldering the joints as the heat could melt the plastic casing on the port. It is strongly recommended that soldering surface-mounted components guide is referenced before proceeding.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.