1
2
3
4
Turn the logic board over so the copper heat sink is facing up.
Disconnect the heat sink temperature sensor cable by pulling it straight up from its socket.
Turn the logic board back over.
« 이전
다음 »
귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.
다음 줄
이전 줄
아래에 새로운 줄 삽입
위에 새로운 줄 삽입
현재 줄 들여쓰기
현재 줄 내어쓰기
현재 줄 삭제
다음 단계로 이동.
이전 단계로 이동.
도움말 열기