주요 콘텐츠로 건너뛰기
도움말
6단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Before applying the adhesive, make sure your iPhone's battery connector lays flat so it doesn't press against the blue release liner. It's okay to temporarily reconnect the battery if needed—just be sure to disconnect it again before installing the display.

Carefully align the exposed lower edge of the adhesive strip with the bottom edge of your iPhone's case.

Once the adhesive is pressed into place, you can't reposition it—you'll have to remove it and start over with new adhesive.

When it's correctly aligned, gently press the exposed lower adhesive strip into place.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.