메인 콘텐츠로 스킵하기
도움말
5단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

When you remove this screw, make sure that the shield plate on top of the bracket plate, is just slightly pushed out of the way. This will free the bracket plate.

After the removal of the bracket plate, you have access to the connector. Move the white clip gently to the lift (upright) position, to free the cable.

The LCD should now easily separate from the logic board.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.