Skip to main content
도움말
7단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Gently remove the main circuit board.

Keep in mind there are some ribbon cable connectors underneath the board. These should pop off easily, or you can use the opening tool to gently remove them once you have the board lifted up a bit. Also be mindful that these get reconnected with you put everything back together!

Power button cable.

Earphone cable.

The main circuit board also is connected to the main camera and the front facing camera with more ribbon cables. These should stay attached, but be delicate. You don't want to get dust in them when you seal everything back up!

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.