메인 콘텐츠로 스킵하기
도움말
1단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

The Thermistor connector is located below the glove box. You can see the white connector hanging out from under the dash.

The purpose of the Thermistor is to keep the Evaporator from freezing. It does this by measuring the temperature and turning off the Compressor when the Evaporator gets below approx. 40 degrees F allowing the Evaporator to defrost.

Locate your Air Conditioning Compressor. The clutch is the center area. If the clutch is engaged the center area will be turning. It will be turned off by the Thermistor to prevent the Evaporator from Freezing.

Here are the tools that you'll need to complete this guide.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.