주요 콘텐츠로 건너뛰기
도움말
10단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Remove the single 8 mm brass Phillips screw securing the inverter to the logic board.

Lift the inverter straight up off the pins on the logic board.

Be sure to lift the inverter straight up off the logic board, as the connector pins are very long and easily bent. If the pins bend during removal, use the connector on the inverter as a guide to bend them straight.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.