메인 콘텐츠로 스킵하기
도움말
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

LCD holder removed from logic board

disconnect the ribbon cable from the logic board. This one requires to move the brown tabs on the left and right hands side in an upward direction. They should just slide up by about an 1/8th of an inch. this will free the ribbon cable.

With the ribbon cable disconnected, remove the front case.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.