주요 콘텐츠로 건너뛰기

Nextbook Flexx 10 Back Cover Replacement

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

2 단계
Nextbook Flexx 10 Back Cover Replacement: 0 단계, 이미지 3개 중 1개 Nextbook Flexx 10 Back Cover Replacement: 0 단계, 이미지 3개 중 2개 Nextbook Flexx 10 Back Cover Replacement: 0 단계, 이미지 3개 중 3개
  • You may use your fingers, or a spudger. Be careful not to break your cover OR your fingernail. Removing the cover requires good judgement.

  • The goal is to separate the black from the silver. Start in a corner, or a flat edge -- whichever works best for you. Remember to not use too much force.

  • Once you start the initial separation, keep going until you free one edge. The goal now is to free three edges of the rectangle.

  • If your progress stops on one side of the rectangle, go to the other side and try there.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.