Skip to main content
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Now the Test Frequency needs to be changed to 10KHz.

Press the Navigation button again, and select MEASURE. Then SETTING, then T.FREQ. Select 10KHz.

The number on the screen that appears is the capacitance between the two tweezer tips at their default distance. This is the Capacitance Offset.

The offset is varied by the distance between the tips. The smaller the component, the closer the tips are together, thus a higher offset evaluation.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.