Skip to main content
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

To store the offset so Smart Tweezers can automatically deduce it from measurements, first, enter the menu, select MODE, and set the device to manual CAP measurement.

Then select HOLD

Set the tweezer tips apart to a distance equal to the component to be measured. This is the offset.

Enter the NULL menu, and select SET.

An asterisk will appear beside the test mode indicator while measuring to indicate an offset has been stored.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.