Skip to main content
도움말
1단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

The iPod Touch 4th Generation front panel is attached to the rear case by adhesive. The use of a heat gun to soften the adhesive is highly recommended.

With the heat gun set on "low", begin heating the lower portion of the Touch near the home button.

It is suggested to heat the desired portion in a circular motion pattern to evenly dissipate the amount of heat throughout the device.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.