주요 콘텐츠로 건너뛰기
도움말
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

In the next few steps, you will desolder the three battery solder joints on the logic board.

Prior to desoldering the 3 leads, there may be some silicon/glue covering them. Remove as much as possible with a plastic or metal spudger (if metal, be extremely careful not to bridge the connections) before applying soldering tip to points.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.