Skip to main content
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Remove the two Allen screws from the bottom.

Another view of the two Allen screws on the top part.

With the four screws removed, gently lift the non-connector side of the hard drive. It will only need to come up by about 1/4 of an inch.

DO NOT lift it to high on that side, it may bend the pins on the connector.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.