Skip to main content
도움말

Replacing an Atari Capacitor

더 나은 이미지가 필요함

더 나은 이미지가 필요함

더 나은 사진은 해당 안내서를 향상시킬 것입니다. 사진 촬영, 편집, 또는 새로운 업로드를 도와주십시오!

This guide will help replace one of the capacitors in the Atari Lynx. Specifically, it is the C10 capacitor which when blown can cause the speaker to not work.

Before starting this guide you may need some experience with soldering/ desoldering. If you do not know how, you can learn by clicking the link on step 5 (when you have to desolder the aluminum tabs).

단계 1 C10 Capacitor  ¶ 

Desolder the four aluminum tabs and for more information on soldering click here. Desolder the four aluminum tabs and for more information on soldering click here.

단계 1 C10 Capacitor  ¶ 

  • Desolder the four aluminum tabs and for more information on soldering click here.

단계 2  ¶ 

Remove the aluminum back protector to gain access to the C10 capacitor.

단계 2  ¶ 

  • Remove the aluminum back protector to gain access to the C10 capacitor.

단계 3  ¶ 

Desolder the C10 capacitor. Desolder the C10 capacitor.

단계 3  ¶ 

  • Desolder the C10 capacitor.