Skip to main content
도움말

Xbox 360 E RF Module Replacement

Replace the RF module of your Xbox 360 E.

  • 작성자: Sarah
  • 예상 시간 5 분
  • 난이도: 보통

Use this guide to replace the RF module in your Xbox 360 E.

섹션
도구

단계 1 RF Module  ¶ 

Looking at the body of the device, locate the green panel to the right of the CD drive. Remove the two 6 mm screws located on the top left and middle right with a T8 Torx screwdriver. Grip the middle of the green board and gently pull it out.

단계 1 RF Module  ¶ 

  • Looking at the body of the device, locate the green panel to the right of the CD drive.

  • Remove the two 6 mm screws located on the top left and middle right with a T8 Torx screwdriver.

  • Grip the middle of the green board and gently pull it out.