메인 콘텐츠로 스킵하기
도움말

PowerBook G4 Aluminum 15" 1.5-1.67 GHz Speakers Replacement

  • 작성자: iRobot
  • 난이도: 어려움

Restore sound to your laptop by replacing the speakers.

단계 1 Speakers  ¶ 

Remove the two 3 mm black Phillips screws from the left ambient light sensor board.

단계 1 Speakers  ¶ 

  • Remove the two 3 mm black Phillips screws from the left ambient light sensor board.

  • Lift the left ambient light sensor board out of the computer, removing tape as necessary.

단계 2  ¶ 

Deroute the Bluetooth and RJ-11 cables from around the left side of the speaker.

단계 2  ¶ 

  • Deroute the Bluetooth and RJ-11 cables from around the left side of the speaker.

단계 3  ¶ 

Disconnect the speaker cable from the DC/Sound card.

단계 3  ¶ 

  • Disconnect the speaker cable from the DC/Sound card.

단계 4  ¶ 

Remove the 4 mm hex nut from below the left speaker.

단계 4  ¶ 

  • Remove the 4 mm hex nut from below the left speaker.

  • Remove the 3 mm black Phillips screw from bottom left corner of the speaker assembly, to the left of the battery compartment.

단계 5  ¶ 

Lift the speaker assembly (including the right speaker) out of the computer.

단계 5  ¶ 

  • Lift the speaker assembly (including the right speaker) out of the computer.