iBook G3 14" Rear Display Bezel Replacement - iFixit 수리 안내서

소개

Internal Prerequisite.

필요한 것

1 단계 Rear Display Bezel

iBook G3 14" Rear Display Bezel Replacement, Rear Display Bezel: 1 단계, 이미지 1/1

Use a 1.5 mm hex screwdriver to remove the two hex screws on either side of the display (four screws total).
If you don't have a 1.5 mm hex driver, you can probably get these screws out with a T6 Torx screwdriver. However, if you use a T6 Torx driver you'll be more likely to strip the screws.

2 단계

iBook G3 14" Rear Display Bezel Replacement: 2 단계, 이미지 1/1

Use your thumbs to slightly separate the rear bezel from the front bezel.
It is helpful to hold the opposing corner of the display stationary to aid in flexing the rear bezel away from the display.

3 단계

iBook G3 14" Rear Display Bezel Replacement: 3 단계, 이미지 1/3

iBook G3 14" Rear Display Bezel Replacement: 3 단계, 이미지 2/3

iBook G3 14" Rear Display Bezel Replacement: 3 단계, 이미지 3/3

Insert the flat end of a spudger into the gap between the front and rear bezels.
Rotate your spudger until it is parallel to the front face of the display.
Run the spudger around the perimeter of the display to separate the rear bezel from its retaining clips.

4 단계

iBook G3 14" Rear Display Bezel Replacement: 4 단계, 이미지 1/1

Lift the rear bezel off the display.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Andrew Bookholt

586,573 평판

안내서 619개 작성하였습니다

배지 +44개 더

댓글 0개

조회 통계:

24 시간 전: 1

7일 전: 6

30일 전: 8

전체 시간: 44