주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

소개

Install an Airport Extreme 802.11g card internally.

  1. Use a coin to rotate the battery locking screw 90 degrees clockwise.
    • Use a coin to rotate the battery locking screw 90 degrees clockwise.

  2. Lift the battery out of the computer.
    • Lift the battery out of the computer.

  3. LCD iPhone 스크린 수리 키트

    평생 품질 보증이 적용되는 저렴한 옵션.

    키트 쇼핑하기

    LCD iPhone 스크린 수리 키트

    수리의 질 말고 비용을 절감하세요.

    키트 쇼핑하기
  4. Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.
    • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

    • If the keyboard does not come free, use a small flathead screwdriver to turn the keyboard locking screw 180 degrees in either direction and try again.

    • Flip the keyboard over, away from the screen, and rest it face-down on the trackpad area.

  5. Push the wire clasp away from the AirPort card and toward the display, then rotate up to free it from the RAM shield.
    • Push the wire clasp away from the AirPort card and toward the display, then rotate up to free it from the RAM shield.

  6. Grasp the clear plastic tab on the AirPort card and pull toward the display.
    • Grasp the clear plastic tab on the AirPort card and pull toward the display.

  7. Hold the Airport card in one hand and use your other hand to remove the antenna cable.
    • Hold the Airport card in one hand and use your other hand to remove the antenna cable.

결론

To reassemble your device, follow these instructions in reverse order.

다른 21명이 해당 안내서를 완성하였습니다.

첨부 문서

iRobot

회원 가입일: 2009년 09월 24일

1 평판

안내서 643개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 15

전체 시간: 29,716