주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

iBook G4 12" 800 MHz-1.2 GHz Rear Display Bezel Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. iBook G4 12" 800 MHz-1.2 GHz Rear Display Bezel Replacement, Rear Display Bezel: 1 단계, 이미지 1/1
    • Use a 1.5mm hex screwdriver to remove the two hex screws on either side of the display (four screws total).

    • If you don't have a 1.5mm hex driver, you can probably get these screws out with a T6 Torx screwdriver. However, if you use a T6 Torx driver you'll be more likely to strip the screws.

  2. iBook G4 12" 800 MHz-1.2 GHz Rear Display Bezel Replacement: 2 단계, 이미지 1/1
    • Use your thumbs to slightly separate the rear bezel from the front bezel.

    • It is helpful to hold the opposing corner of the display stationary to aid in flexing the rear bezel away from the display.

  3. iBook G4 12" 800 MHz-1.2 GHz Rear Display Bezel Replacement: 3 단계, 이미지 1/3 iBook G4 12" 800 MHz-1.2 GHz Rear Display Bezel Replacement: 3 단계, 이미지 2/3 iBook G4 12" 800 MHz-1.2 GHz Rear Display Bezel Replacement: 3 단계, 이미지 3/3
    • Insert the flat end of a spudger into the gap between the front and rear bezels.

    • Rotate your spudger until it is parallel to the front face of the display.

    • Run the spudger around the perimeter of the display to separate the rear bezel from its retaining clips.

  4. iBook G4 12" 800 MHz-1.2 GHz Rear Display Bezel Replacement: 4 단계, 이미지 1/1
    • Lift the rear bezel off the display.

결론

To reassemble your device, follow these instructions in reverse order.

Andrew Bookholt

585,718 평판

안내서 619개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 532