기기를 수리하세요 커뮤니티 상점

iDeaUSA CT8 Motherboard Replacement

소개

In cases where the device is not responding, this guide will help you replace the motherboard.

필요한 것

  1. iDeaUSA CT8 Motherboard Replacement, Motherboard: 1 단계, 이미지 1/3 iDeaUSA CT8 Motherboard Replacement, Motherboard: 1 단계, 이미지 2/3 iDeaUSA CT8 Motherboard Replacement, Motherboard: 1 단계, 이미지 3/3

    • Place the tablet on a flat surface, facing upwards.

    • Starting from the portholes, use the plastic opening tools to remove the back cover of the tablet from the top half.

    • Being cautious of the wire connecting the speaker and the motherboard, place the front and back portion of the tablet close in proximity.

    편집

  2. iDeaUSA CT8 Motherboard Replacement: 2 단계, 이미지 1/3 iDeaUSA CT8 Motherboard Replacement: 2 단계, 이미지 2/3 iDeaUSA CT8 Motherboard Replacement: 2 단계, 이미지 3/3

    • Locate the five 3.5 mm black screws on the motherboard.

    • Use the #00 Phillips screwdriver to remove the screws, place them in an appropriate location.

    편집

  3. iDeaUSA CT8 Motherboard Replacement: 3 단계, 이미지 1/1

    • Carefully peel off the tape covering the circuit boards and blue ribbons. The tape can be disposed or saved for reuse.

    편집

  5. iDeaUSA CT8 Motherboard Replacement: 4 단계, 이미지 1/3 iDeaUSA CT8 Motherboard Replacement: 4 단계, 이미지 2/3 iDeaUSA CT8 Motherboard Replacement: 4 단계, 이미지 3/3
    이 단계에 사용된 도구:
    Tweezers
    $4.99
    구매

    • After removing the tape, two blue ribbon wires can now be accessed. To disconnect, gently lift up the plastic ZIF tabs covering the wires.

    • Upon lifting the tab, the ribbons can now be safely pulled out of their connections.

    • To avoid breaking or damaging the plastic ZIF tabs, it is recommended to use tweezers.

    편집

  6. iDeaUSA CT8 Motherboard Replacement: 5 단계, 이미지 1/1

    • Locate the two wires connecting the speaker to the motherboard.

    • Use a soldering iron to desolder the red and black wires from their sockets.

    • Solder the speaker wires back in place during reassembly.

    편집

  7. iDeaUSA CT8 Motherboard Replacement: 6 단계, 이미지 1/2 iDeaUSA CT8 Motherboard Replacement: 6 단계, 이미지 2/2

    • Disconnect the wires connecting the battery to the motherboard.

    • Start from the sides and gently wiggle the connection out until it;s loose enough to pull.

    편집

  8. iDeaUSA CT8 Motherboard Replacement: 7 단계, 이미지 1/2 iDeaUSA CT8 Motherboard Replacement: 7 단계, 이미지 2/2

    • Pull out and free the motherboard from its position.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Daniel Sevilla

회원 가입일: 09/20/17

412 평판

안내서 3개 작성하였습니다

배지: 12

배지 +9개 더

팀

University of North Texas, Team S7-G5, Thomas Fall 2017 University of North Texas, Team S7-G5, Thomas Fall 2017 회원

UNT-THOMAS-F17S7G5

3 회원들

안내서 8개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 3

30일 전: 5

전체 시간: 133