주요 콘텐츠로 건너뛰기

iHome iBT84 Light Fixture Replacement

필요한 것

  1. iHome iBT84 Light Fixture Replacement, Motherboard: 1 단계, 이미지 1/2 iHome iBT84 Light Fixture Replacement, Motherboard: 1 단계, 이미지 2/2
    • On the opposite side of the speaker should be a sticker, remove it with your fingers or the flat plastic iFIxit tool.

    • Use a Philip's screwdriver to take the screws out of the cover.

  2. iHome iBT84 Light Fixture Replacement: 2 단계, 이미지 1/2 iHome iBT84 Light Fixture Replacement: 2 단계, 이미지 2/2
    • Once the screws are all out, the cover should come off revealing the motherboard.

  3. iHome iBT84 Light Fixture Replacement: 3 단계, 이미지 1/3 iHome iBT84 Light Fixture Replacement: 3 단계, 이미지 2/3 iHome iBT84 Light Fixture Replacement: 3 단계, 이미지 3/3
    • You will notice that the triangular black volume piece is loose, make sure to take that off revealing the buttons.

    • Once that is done, the motherboard can be taken out. May require some wiggling.

    • Make sure none of the wires are damaged and that they are all connected.

  4. iHome iBT84 Light Fixture Replacement: 4 단계, 이미지 1/1
    • The connections shown here can be taken off by pulling on the white plastic connector piece.

    • The same can be said about the white, paper like, connectors. Pull on them gently.

    • Once all connections are apart, the motherboard is safe to be replaced.

  5. iHome iBT84 Light Fixture Replacement, Light Fixture: 5 단계, 이미지 1/1
    • Use the screwdriver to unscrew the screws on the left and right sides.

  6. iHome iBT84 Light Fixture Replacement: 6 단계, 이미지 1/1
    • Once unscrewed, use the metal spudge to lift the base of the light fixture.

  7. iHome iBT84 Light Fixture Replacement: 7 단계, 이미지 1/2 iHome iBT84 Light Fixture Replacement: 7 단계, 이미지 2/2
    • Lift the base of the light fixture out with the lights.

    • Be careful. The light fixture's can be easily bent.

  8. iHome iBT84 Light Fixture Replacement: 8 단계, 이미지 1/2 iHome iBT84 Light Fixture Replacement: 8 단계, 이미지 2/2
    • Pull gently on the individual light fixture that needs to be replaced.

    • Place new individual LED light strip.

결론

To reassemble your device, follow these instructions in reverse order.

Joshua Lopez

회원 가입일: 09/25/17

101 평판

안내서 1개 작성함

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 569