주요 콘텐츠로 건너뛰기

소개

Prerequisite-only guide to remove the hard drive in an iMac 27" 2017.

  1. Pull straight up on the SATA data/power cable to disconnect it from the drive. Pull straight up on the SATA data/power cable to disconnect it from the drive.
    • Pull straight up on the SATA data/power cable to disconnect it from the drive.

  2. Remove two 7.3 mm T8 screws securing the left hard drive bracket to the rear case.
    • Remove two 7.3 mm T8 screws securing the left hard drive bracket to the rear case.

  3. Grab the hard drive and left hard drive bracket together. Tilt the left side up away from the rear case, and slide the assembly to the left. Remove the hard drive and left hard drive bracket from the iMac.
    • Grab the hard drive and left hard drive bracket together.

    • Tilt the left side up away from the rear case, and slide the assembly to the left.

    • Remove the hard drive and left hard drive bracket from the iMac.

  4. Remove the left hard drive bracket. Remove the left hard drive bracket.
    • Remove the left hard drive bracket.

결론

To reassemble your device, follow these instructions in reverse order.

Adam O'Camb

회원 가입일: 2015년 04월 11일

145,694 평판

안내서 417개 작성하였습니다

iFixit iFixit 회원

Community

138 회원들

안내서 16,983개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 4

전체 시간: 34