소개

Upgrade your RAM DIMM Module for more memory.

부품

부품은 필요하지 않습니다.

  1. Place the computer monitor face down on a safe, harmless surface. Using a  Phillips #00 screw driver, remove the four 6.86 mm screws from the metal plate.
    • Place the computer monitor face down on a safe, harmless surface.

    • Using a Phillips #00 screw driver, remove the four 6.86 mm screws from the metal plate.

  2. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  3. Remove the metal plate from bottom of the iMac G4.
    • Remove the metal plate from bottom of the iMac G4.

    • The four screws do not completely separate from the metal plate.

  4. Release the tabs on each side of the module by simultaneously pushing each tab away from the RAM. These tabs lock the module in place and releasing them will cause the module to "pop" up.
    • Release the tabs on each side of the module by simultaneously pushing each tab away from the RAM.

    • These tabs lock the module in place and releasing them will cause the module to "pop" up.

    • Remove the RAM module from the iMac.

결론

To reassemble your device, follow these instructions in reverse order.

다른 8명이 해당 안내서를 완성하였습니다.

Ryan Kozak

회원 가입일: 2011년 10월 10일

1,235 평판

안내서 3개 작성하였습니다

Cal Poly, Team 5-32, Amido Fall 2011 Cal Poly, Team 5-32, Amido Fall 2011 회원

CPSU-AMIDO-F11S5G32

4 회원들

안내서 8개 작성하였습니다

Please correct the title, this is a 144 pin SODIMM, it is not a DIMM

The 168 pin DIMM is used in the internal socket.

Canadaram - 답글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 6

지난 30일: 16

전체 시간: 4,622