주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

iMac G5 17" Model A1144 Hard Drive Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. iMac G5 17" Model A1144 Hard Drive Replacement, Hard Drive: 1 단계, 이미지 1/1
    • Disconnect the hard drive thermal sensor by pulling the connector away from its socket parallel to the face of the hard drive.

  2. iMac G5 17" Model A1144 Hard Drive Replacement: 2 단계, 이미지 1/2 iMac G5 17" Model A1144 Hard Drive Replacement: 2 단계, 이미지 2/2
    • Pressing the top of the hard drive bracket down to release it from the rear case requires a substantial amount of force, so we recommend laying your iMac stand-side down on a table to avoid knocking it over.

    • Press the hard drive bracket down toward the bottom edge of your iMac to free it from the rear case, then rotate the top of the drive toward yourself.

    • Lift the hard drive off its lower pins and pull it out of the rear case, minding the cables that are still attached.

    • When reinstalling the hard drive, be careful not to push the rubber grommets through the chassis with the hard drive pins as retrieving them may require logic board removal.

  3. iMac G5 17" Model A1144 Hard Drive Replacement: 3 단계, 이미지 1/2 iMac G5 17" Model A1144 Hard Drive Replacement: 3 단계, 이미지 2/2
    • Insert the flat end of a spudger into the gap between the SATA power connector and the hard drive.

    • Twist the spudger to separate the SATA power connector from the hard drive.

    • Pull the SATA power connector away from the hard drive.

  4. iMac G5 17" Model A1144 Hard Drive Replacement: 4 단계, 이미지 1/1
    • Pull the SATA data cable away from the hard drive.

    • Hard drive remains.

결론

To reassemble your device, follow these instructions in reverse order.

Walter Galan

694,561 평판

안내서 1,203개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 542