소개

Remove the access door to replace RAM chips.

부품

부품은 필요하지 않습니다.

Orient the iMac face-side down on a table with the bottom edge facing yourself.
  • Orient the iMac face-side down on a table with the bottom edge facing yourself.

  • Remove the two Phillips screws securing the access door to the bottom grille of your iMac.

  • The screws are captive in the access door.

  • Before beginning the repair, unplug the computer and press and hold the power switch for 20-30 seconds, to discharge internal capacitors.

As you remove the screws during these steps, place them on a towel or a piece of cardboard. With a Sharpie label a piece of masking tape with the step number from which they were taken from. Then place the removed screws under the tape.

This ongoing step will aid in you having control on your reassembly without searching for and identifying the size and length all the screws that you are about to remove.

R51801 - 답글

Remove the access door.
  • Remove the access door.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 14명이 해당 안내서를 완성하였습니다.

Andrew Bookholt

496,867 평판

안내서 619개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 4

지난 30일: 16

전체 시간: 9,888