소개
Replace a burned-out optical drive fan to keep temperatures down.
필요한 것
-
-
Stick a suction cup near each of the two top corners of the glass panel.
-
If your suction cups refuse to stick, try cleaning both the glass panel and the suction cup with a mild solvent.
-
-
-
-
Pull the optical drive thermal sensor connector straight away from its socket on the logic board.
-
-
-
Remove the single 13 mm T10 Torx screw securing the optical drive fan to the outer case.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
다른 4명이 해당 안내서를 완성하였습니다.