주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

소개

Internal Prerequisite.

부품

지정된 부품이 없습니다.

  1. Remove the strip of tape securing the GPU thermal sensor cable to the logic board.
    • Remove the strip of tape securing the GPU thermal sensor cable to the logic board.

  2. Remove the following three screws:
    • Remove the following three screws:

    • One 4.2 mm T10 Torx screw

    • Two 5 mm T8 Torx screws

  3. Nintendo Switch 키트

    게임으로 돌아가기 위한 빠른 해결책

    Nintendo Switch 키트 쇼핑하기

    Nintendo Switch 키트

    게임으로 돌아가기 위한 빠른 해결책

    Nintendo Switch 키트 쇼핑하기
  4. Grab the GPU thermal sensor cable connector and pull it straight up and out of its socket on the logic board. Do not pull the connector out by its cables.
    • Grab the GPU thermal sensor cable connector and pull it straight up and out of its socket on the logic board.

    • Do not pull the connector out by its cables.

  5. Lift the GPU heat sink slightly and pull the GPU board out of its socket on the logic board.
    • Lift the GPU heat sink slightly and pull the GPU board out of its socket on the logic board.

결론

To reassemble your device, follow these instructions in reverse order.

Andrew Bookholt

542,257 평판

안내서 618개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 505