iMac Intel 21.5" EMC 2389 Hard Drive Replacement - iFixit 수리 안내서

소개

Prereq only

필요한 것

1 단계 Hard Drive

iMac Intel 21.5" EMC 2389 Hard Drive Replacement, Hard Drive: 1 단계, 이미지 1/2

iMac Intel 21.5" EMC 2389 Hard Drive Replacement, Hard Drive: 1 단계, 이미지 2/2

Before disconnecting the thermal sensor cable, take note of its orientation. It is extremely important to reinstall the connector in the current orientation so the fans will not run at full speed. If you have multiple pins on your replacement hard drive, put the connector closest to the SATA connections and closest to the PCB board.
Disconnect the hard drive thermal sensor cable from the hard drive.

2 단계

iMac Intel 21.5" EMC 2389 Hard Drive Replacement: 2 단계, 이미지 1/1

Remove the two T8 Torx screws securing the upper bracket to the hard drive.
Remove the upper bracket from the hard drive.

3 단계

iMac Intel 21.5" EMC 2389 Hard Drive Replacement: 3 단계, 이미지 1/1

Remove the two T8 Torx pins from the other side of the hard drive.

4 단계

iMac Intel 21.5" EMC 2389 Hard Drive Replacement: 4 단계, 이미지 1/1

Carefully peel off the piece of EMI foam attached to the front of the hard drive.
Don't forget to transfer this to your new hard drive.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

Andrew Bookholt

586,133 평판

안내서 619개 작성하였습니다

배지 +44개 더

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 9

전체 시간: 206