주요 콘텐츠로 건너뛰기

소개

Prereq to remove fan after hard drive brackets.

부품

지정된 부품이 없습니다.

  1. Gently pull the fan cable connector straight away from its socket on the logic board. Gently pull the fan cable connector straight away from its socket on the logic board.
    • Gently pull the fan cable connector straight away from its socket on the logic board.

  2. Remove the three 12.3 mm T10 shoulder screws securing the fan to the rear enclosure.
    • Remove the three 12.3 mm T10 shoulder screws securing the fan to the rear enclosure.

  3. Remove the fan from the iMac. Remove the fan from the iMac.
    • Remove the fan from the iMac.

결론

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

회원 가입일: 2012년 10월 18일

438,092 평판

안내서 547개 작성하였습니다

iFixit iFixit 회원

Community

136 회원들

안내서 16,090개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 47