주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

Prereq only.

부품

지정된 부품이 없습니다.

  1. Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess. The hard drive is attached by a single SATA power/data cable, do not attempt to fully remove it from the iMac. The hard drive is attached by a single SATA power/data cable, do not attempt to fully remove it from the iMac.
    • Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess.

    • The hard drive is attached by a single SATA power/data cable, do not attempt to fully remove it from the iMac.

  2. Use a spudger to disconnect the single SATA power and data combo cable. Use a spudger to disconnect the single SATA power and data combo cable. Use a spudger to disconnect the single SATA power and data combo cable.
    • Use a spudger to disconnect the single SATA power and data combo cable.

  3. Remove the hard drive from the iMac.
    • Remove the hard drive from the iMac.

결론

To reassemble your device, follow these instructions in reverse order.

Walter Galan

658,367 평판

안내서 1,203개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 64