주요 콘텐츠로 건너뛰기

소개

Prerequisite only guide for removing the hard drive assembly from a 21.5" Retina 4K Late 2015 iMac.

부품

지정된 부품이 없습니다.

  1. Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess. The hard drive is still attached by its SATA cable; do not attempt to fully remove it from the iMac yet. The hard drive is still attached by its SATA cable; do not attempt to fully remove it from the iMac yet.
    • Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess.

    • The hard drive is still attached by its SATA cable; do not attempt to fully remove it from the iMac yet.

  2. Use a spudger to disconnect the single SATA cable by prying it gently away from the hard drive. Remove the hard drive assembly from the iMac. Remove the hard drive assembly from the iMac.
    • Use a spudger to disconnect the single SATA cable by prying it gently away from the hard drive.

    • Remove the hard drive assembly from the iMac.

결론

To reassemble your device, follow these instructions in reverse order.

Evan Noronha

회원 가입일: 2015년 02월 05일

179,595 평판

안내서 177개 작성하였습니다

iFixit iFixit 회원

Community

107 회원들

안내서 9,591개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 166