주요 콘텐츠로 건너뛰기

소개

Prereq only for stripping down the logic board.

  1. The SATA data connector has a clip that must be pressed to allow removal. While pressing on the clip with your thumb, lift and disconnect the SATA data connector from its socket on the logic board. While pressing on the clip with your thumb, lift and disconnect the SATA data connector from its socket on the logic board.
    • The SATA data connector has a clip that must be pressed to allow removal.

    • While pressing on the clip with your thumb, lift and disconnect the SATA data connector from its socket on the logic board.

  2. Grasp the hard drive power connector and gently pull it out of its socket on the logic board. Grasp the hard drive power connector and gently pull it out of its socket on the logic board.
    • Grasp the hard drive power connector and gently pull it out of its socket on the logic board.

결론

To reassemble your device, follow these instructions in reverse order.

Evan Noronha

회원 가입일: 2015년 02월 05일

206,547 평판

안내서 178개 작성하였습니다

iFixit iFixit 회원

Community

136 회원들

안내서 16,075개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 46